Problem: Food has stopped flowing into the pump from the pump bag.
Solution: Find and fix the blockage. Is there food in the bag? If yes, press RUN/PAUSE or HOLD to pause the pump and look for kinks in the tubing between the pump bag and the pump, or where the tubing exits the feeding bag. Straighten kinks out of the tubing. Press RUN again. Listen for 3 beeps and look for RUN on the display; the pump is running. If the bag is empty, press RUN/PAUSE or HOLD to pause the pump. Refill and close bag, removing as much air as possible. Press RUN again. Look for RUN or the droplet on the display; the pump is running.
NOTE: Sometimes you get multiple alarms consecutively, even after fixing the source of the alarm. Pressing RUN/PAUSE or HOLD and then holding the PRIME button down for 5 seconds before pressing RUN again sometimes clears the problem. If problems continue, try using a new feed set and feeding bag.